page <1> 1 ceramic core 3 electrode (ag/pd+ni+sn) 2 magnet wire 4 uv glue features ?? ceramic base provide high srf ?? ultra-compact inductors provide high q factors ?? low?profle,?high?current?options ?? miniature smd chip inductor for fully automated assembly ?? ? outstanding?endurance?from?pull-up?force,?mechanical? shock and pressure ?? tighter tolerance down to 2% ?? smaller size of 0402 (1005) applications rf products: ?? cellular phone (cdma/gsm/phs) ?? cordless phone (dect/ct1ct2) ?? remote?control,?security?system ?? wireless pda ?? smart phone ?? wll,?wireless?lan?/?mouse?/?keyboard?/?earphone ?? vco,?rf?module?&?other?wireless?products ?? base?station,?repeater ?? gps receiver broad band applications: ?? catv ? filter,? tuner ?? cable modem/ xdsl tuner ?? set top box it applications: ?? usb 2.0 ?? ieee 1394 construction dimensions type size (inch) a max. b max. c max. d ref. e f g h i j weight (g) (1,000pcs) mcft02 0402 1.27 0.76 0.61 0.15 0.51 0.23 0.56 0.66 0.5 0.46 0.8 mcft03 0603 1.8 1.12 1.02 0.38 0.76 0.33 0.86 1.02 0.64 0.64 3.46 mcft05 0805 2.29 1.73 1.52 0.51 1.27 0.44 1.02 1.78 1.02 0.76 12.13 MCFT06 1206 3.45 1.9 1.4 0.5 1.6 0.5 2.2 1.93 1.02 1.78 40 standard unit: mm www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <2> type size (inch) a max. b max. c max. d ref. e f g h i j mcft05 0805 2.29 1.73 1.03 0.51 1.27 0.44 1.02 1.78 1.02 0.76 low profle type size (inch) a max. b max. c max. d ref. e f g h i j mcft03 0603 1.8 1.12 1.02 0.38 0.76 0.33 0.86 1.02 0.64 0.64 mcft05 0805 2.29 1.73 1.52 0.51 1.27 0.44 1.02 1.78 1.02 0.76 high current / high q high srf type size (inch) a max. b max. c max. d ref. e f g h i j weight (g) (1,000pcs) mcft02 0402 1.15 0.7 0.6 0.45 0.2 0.6 0.65 0.35 0.5 0.8 0.8 colour coding 0603 / 0805 / 1206 type (0402 type is no colour coding) hfdhripdlhwhhsdwdhpdnhglwdlqjhfrrgrw the inductance value represented by the dot is shown on the data page for each type. color coding cod e inductance (nh) tolerance l freq. (mhz) quality factor min. srf (ghz) min. dcr (?) max. idc (ma) max. 900mhz 1.7ghz l q l q 1 10% 250 16 12.7 0.045 1360 1.02 77 1.02 69 2.2 10% 250 19 10.8 0.07 960 2.19 59 2.23 100 3.3 10% 250 19 7 0.066 840 3.1 65 3.12 87 4.7 250 18 4.7 0.13 640 4.55 48 4.68 68 6.8 250 20 4.8 0.083 680 6.56 63 6.93 78 10 250 21 3.9 0.195 480 9.8 50 10.1 67 12 250 24 3.6 0.12 640 11.9 53 12.7 71 15 250 24 3.28 0.172 560 14.6 55 15.5 77 18 250 25 3.1 0.23 420 18.3 57 20.3 62 standard electrical specifcations mcft02 wire wound chip inductors / standard type unit: mm unit: mm unit: mm www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <3> mcft02 wire wound chip inductors / standard type mcft03 wire wound chip inductors / standard type 22 2,? 5,? 10% 250 25 2.8 0.3 400 23.2 53 26.8 53 27 2,? 5,? 10% 250 24 2.48 0.3 400 28.7 49 33.5 63 33 2,? 5,? 10% 250 24 2.35 0.35 400 34.9 31 41.7 32 39 2,? 5,? 10% 250 25 2.1 0.55 200 41.7 47 50.2 45 47 2,? 5,? 10% 250 25 2.1 0.83 150 50 38 55.8 37 56 2,? 5,? 10% 250 25 1.76 0.97 100 57.4 49 72.4 40 68 2,? 5,? 10% 250 22 1.62 1.12 100 69.6 45 83.4 38 82 2,? 5,? 10% 250 22 1.26 1.55 50 - - - - 100 2,? 5,? 10% 250 22 1.16 2 30 - - - - 120 2,? 5,? 10% 250 20 > 1.8 2.66 50 - - - - inductance (nh) tolerance l freq. (mhz) quality factor min. srf dcr idc (ma) max. 900mhz 1.7ghz colour code (ghz) min. (?)?max. l q l q 2.2 5,?10% 250 15 6 0.1 700 2.18 41 2.2 64 white 3.3 2,?5,?10% 250 22 > 6 0.08 700 3.35 47 3.4 65 red 4.7 2,?5,?10% 250 25 5.8 0.12 700 4.65 53 4.8 67 violet 6.8 2,?5,?10% 250 27 5.8 0.11 700 6.75 60 7.1 81 red 10 2,?5,?10% 250 31 4.8 0.13 700 10 66 10.6 83 orange 12 2,?5,?10% 250 35 4 0.13 700 12.3 72 13.5 83 yellow 15 2,?5,?10% 250 35 4 0.17 700 15.4 64 16.8 89 green 18 2,?5,?10% 250 35 3.1 0.17 700 18.7 70 21.4 69 blue 22 2,?5,?10% 250 38 3 0.19 700 22.8 73 26.1 71 violet 27 2,?5,?10% 250 40 2.8 0.22 600 29.2 74 34.6 65 gray 33 2,?5,?10% 250 40 2.3 0.22 600 36 67 49.5 42 white 39 2,?5,?10% 250 40 2.2 0.25 600 42.7 60 60.2 40 black 47 2,?5,?10% 200 38 2 0.28 600 52.2 62 77.2 35 brown 56 2,?5,?10% 200 38 1.9 0.31 600 62.5 56 97 26 red 68 2,?5,?10% 200 37 1.7 0.34 600 80.5 54 168 21 orange 82 2,?5,?10% 150 34 1.7 0.54 400 96.2 54 177 21 green 100 2,?5,?10% 150 34 1.4 0.58 400 124 49 319.5 13 blue 120 2,?5,?10% 150 32 1.3 0.65 300 166 39 529.3 8 gray 150 2,?5,?10% 100 28 1.3 0.95 280 230 25 - - white 180 2,?5,?10% 100 25 1.25 1.4 250 305 22 - - black 220 2,?5,?10% 100 25 1.2 1.6 250 377 21 - - brown 270 2,?5,?10% 100 25 0.9 2.1 200 523 19 - - red 330 2,?5,?10% 100 25 0.9 3.8 100 680.4 20 - - blue 390 2,?5,?10% 100 25 0.9 4.35 100 734.5 29 - - yellow 470 2,?5,?10% 100 23 0.6 3.6 80 - - - - white www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <4> inductance (nh) tolerance l freq. (mhz) quality factor min. srf (ghz) min. dcr (?) max. idc (ma) max. colour code 10 250 60 @ 500mhz 4.2 0.1 600 blue 12 250 50 @ 500mhz 4 0.15 600 orange 15 250 50 @ 500mhz 3.4 0.17 600 yellow 18 250 50 @ 500mhz 3.3 0.2 600 green 22 250 55 @ 500mhz 2.6 0.22 500 blue 27 250 55 @ 500mhz 2.5 0.25 500 violet 33 250 60 @ 500mhz 2.05 0.27 500 gray 39 250 60 @ 500mhz 2 0.29 500 white 47 200 60 @ 500mhz 1.65 0.31 500 black 56 200 60 @ 500mhz 1.55 0.34 500 brown 68 200 60 @ 500mhz 1.45 0.38 500 red 82 150 65 @ 500mhz 1.3 0.42 400 orange 100 150 65 @ 500mhz 1.2 0.46 400 yellow 120 150 50 @ 250mhz 1.1 0.51 400 green 150 100 50 @ 250mhz 0.92 0.56 400 blue 180 100 50 @ 250mhz 0.87 0.64 400 violet 220 100 50 @ 250mhz 0.85 0.7 400 gray 270 100 48 @ 250mhz 0.65 1 350 white 330 100 48 @ 250mhz 0.6 1.4 310 black 390 100 48 @ 250mhz 0.56 1.5 290 brown 470 50 33 @ 100mhz 0.375 1.7 250 red 560 25 23 @ 50mhz 0.34 1.9 230 orange 680 25 23 @ 50mhz 0.2 2.2 190 green 820 25 23 @ 50mhz 0.2 2.35 180 violet 25 20 @ 50mhz 0.1 2.5 170 gray 7.9 16 @ 25mhz 0.1 2.5 170 black 7.9 16 @ 7.9mhz 0.06 2.7 160 red 7.9 15 @ 7.9mhz 0.04 4.4 90 blue 7.9 15 @ 7.9mhz 0.04 6.4 90 green mcft05 wire wound chip inductors / standard type www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <5> MCFT06 wire wound chip inductors / standard type inductance (nh) tolerance l freq. (mhz) quality factor min. srf (ghz) min. dcr (?) max. idc (ma) max. colour code 10 100 40 @ 300mhz 4. 0.08 red 15 100 40 @ 300mhz 3.2 0.1 yellow 22 100 50 @ 300mhz 2.2 0.1 blue 33 100 55 @ 300mhz 1.8 0.11 gray 47 100 55 @ 300mhz 1.5 0.13 black 68 100 55 @ 300mhz 1.2 0.26 950 red 150 100 60 @ 300mhz 0.95 0.31 750 blue 220 50 55 @ 300mhz 0.76 0.5 670 gray 330 50 45 @ 150mhz 0.65 0.62 590 black 470 50 45 @ 150mhz 0.55 1.3 490 red 680 35 45 @ 150mhz 0.45 1.58 430 yellow 35 45 @ 150mhz 0.4 2.8 320 blue low profle electrical specifcations mcft05 wire wound chip inductors / low profle type inductance (nh) tolerance l freq. (mhz) quality factor min. srf (ghz) min. dcr (?) max. idc (ma) max. colour code 10 250 55 @ 750mhz 3.3 0.08 800 green 12 250 55 @ 750mhz 3.8 0.1 800 blue 15 250 50 @ 500mhz 2.95 0.1 800 violet 18 250 50 @ 500mhz 3.1 0.13 800 gray 22 250 50 @ 500mhz 2.9 0.15 800 whit 27 250 50 @ 500mhz 2.45 0.23 600 black 33 250 50 @ 500mhz 2.35 0.28 600 brown 39 250 50 @ 500mhz 2.2 0.33 600 red 47 200 50 @ 500mhz 2 0.39 600 orange 56 200 50 @ 500mhz 1.85 0.39 500 yellow 68 200 50 @ 500mhz 1.5 0.4 500 green 82 150 50 @ 500mhz 1.5 0.44 500 blue 100 150 50 @ 500mhz 1.2 0.64 400 violet 120 150 40 @ 250mhz 1.15 0.68 300 gray 150 150 40 @ 250mhz 1.05 0.8 300 whit 1000 25 16 @ 50mhz 0.08 3.5 170 black www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <6> high current electrical specifcations mcft03 wire wound chip inductors / high current type inductance (nh) tolerance l freq. (mhz) quality factor min. srf (ghz) min. dcr (?) max. idc (ma) max. colour code 6.8 250 35 5.8 0.054 orange 10 250 38 3.7 0.071 green 12 250 38 3 0.075 blue 15 250 38 2.8 0.08 violet 18 250 40 2.8 0.099 gray 22 250 42 2.4 0.099 white high q electrical specifcations mcft05 wire wound chip inductors / high q type inductance (nh) tolerance l freq. (mhz) quality factor min. srf (ghz) min. dcr (?) max. idc (ma) max. colour code 10 250 80 @ 1000mhz 3 0.06 black 12 250 80 @ 1000mhz 3 0.045 orange 15 250 80 @ 1000mhz 2.8 0.1 black 18 250 75 @ 500mhz 2.55 0.06 green 22 250 80 @ 500mhz 2 0.1 black 27 250 75 @ 500mhz 2 0.07 violet 39 250 65 @ 500mhz 1.6 0.11 white high srf electrical specifcations mcft02 wire wound chip inductors / high srf type inductance (nh) tolerance l freq. (mhz) q srf (ghz) min. dcr (?) max. idc (ma) max. 900mhz 1.7ghz 1 q+q+ 250 46 75 16 0.03 2.2 q+q+ 250 60 86 15.1 0.038 3.3 q+ 250 66 95 12.8 0.045 4.7 q+ 250 58 83 6.85 0.06 6.8 250 68 94 5.8 0.055 10 250 62 90 4.7 0.085 12 250 66 100 4.4 0.09 15 250 62 85 3.9 0.11 18 250 58 74 3.55 0.12 900 22 250 60 74 3.3 0.16 800 www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <7> mcft02 wire wound chip inductors / high srf type electrical performance test item requirement test method inductance refer to standard electrical characteristic spec. hp4286 q hp4286 srf hp4287 dc resistance rdc micro-ohm meter (gom-801g) rated current idc applied?the?current?to?coils,? the?inductance?change?should? be less than 10% to initial value over load inductors shall have no evidence of electrical and mechanical damage applied 2 times of rated allowed dc current to inductor for a period of 5 minutes withstanding voltage inductors shall be no evidence of electrical and mechanical damage. ac voltage of 500 vac applied between inductors terminal and case for 1 min. insulation resistance 1,000m?min. 100 vdc applied between inductor terminal and case 27 2%,?3%,?5%,?10% 250 62 86 3.2 0.275 450 33 2%,?3%,?5%,?10% 250 61 80 2.8 0.33 490 39 2%,?3%,?5%,?10% 250 56 84 2.6 0.43 450 47 2%,?3%,?5%,?10% 250 48 62 2.4 0.58 420 item requirement test method vibration appearance: no damage l change: within 5% q change: within 10% test device shall be soldered on the substrate oscillation frequency: 10 to 55 to 10hz for 1 min. amplitude: 1.5 mm time: ?2?hrs?for?each?axis?(x,? y ?&z),?total?6?hrs resistance to soldering heat solder temperature: 2605c immersion time: 102 seconds component adhesion (push test) 1 lbs. for 0402 2 lbs. for 0603 3 lbs. for the rest the device should be soldered (2605 for 10 seconds) to a tinned copper subs rate. a dynamiter force gauge should be applied to the side of the component. the device must with stand a minimum force of 2 or 4 pounds without a failure of adhesion on termination drop no damage dropping chip by each side and each corner. drop 10 times in total drop height: 100 cm drop weight: 125 g solderability 90% covered with solder inductor shall be dipped in a melted solder bath at 2455 for 3 seconds resistance to solvent no damage on appearance and marking mil-std-202f, ?method?215d mechanical performance test www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <8> climatic test item requirement test method temperature characteristic appearance: no damage l change: within 10% q change: within 20% -40 ~ +125c humidity temperature: 40 2c relative humidity: 90 ~ 95% time: 96 2 hrs measured after exposure in the room condition for 2 hrs low temperature storage temperature: -40 2c time: 96 2 hrs inductors are tested after 1 hour at room temperature thermal shock one cycle: step temperature(c) time (min.) 1 -25 3 30 2 25 2 15 3 125 3 30 4 25 2 15 total: 5 cycles high temperature storage temperature: 125 2c time: 96 2 hrs measured after exposure in the room condition for 1hour high temperature load life there should be no evidence of short of open circuit. temperature: ?85?2c? time: ?1,000?12?hrs load: allowed dc current damp heat with load temperature: 40 2c relative?humidity:?90?~?95%? time: ?1,000?12?hrs load: allowed dc current packaging reel dimensions & packaging quantity thickness: 0.1(0.004) max storage temperature: 253c; humidity < 80%rh www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <9> paper tape specifcation and packaging quantity embossed plastic tape specifcation and packaging quantity a b h f p p0 p1 w reel (ea) 0.72 1.19 0.6 3.5 4 4 2 8 1.35 1.95 0.95 3.5 4 4 2 8 a b c d e f g h i reel (ea) 8 1.85 4 2.3 3.5 1.75 2 1.45 0.23 8 1.8 4 2.3 3.5 1.75 2 0.9 0.23 8 1.85 4 2.3 3.5 1.75 2 1.45 0.23 8 1.95 4 3.5 3.5 1.75 2 1.5 0.23 unit: mm unit: mm description part number ,qgfwr 1 mcft000063 qgxfwru 1+ mcft000064 qgxfwru 1+ mcft000065 qgxfwru 1+ mcft000066 qgxfwru 1+ mcft000067 qgxfwru 1+ mcft000068 qgxfwru 1+ mcft000069 qgxfwru 1+ mcft000070 qgxfwru 1+ mcft000071 qgxfwru 1+ mcft000072 qgxfwru 1+ mcft000073 qgxfwru 1+ mcft000074 qgxfwru 1+ mcft000075 qgxfwru 1+ mcft000076 qgxfwru 1+ mcft000077 qgxfwru 1+ mcft000078 qgxfwru 1+ mcft000079 qgxfwru 1+ mcft000080 qgxfwru 1+ mcft000081 part number table www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
page <10> inductor, ?0603,?6.8nh mcft000082 inductor, ?0603,?10nh mcft000083 inductor, ?0603,?12nh mcft000084 inductor, ?0603,?15nh mcft000085 inductor, ?0603,?18nh mcft000086 inductor, ?0603,?22nh mcft000087 inductor, ?0603,?27nh mcft000088 inductor, ?0603,?33nh mcft000089 inductor, ?0603,?39nh mcft000090 inductor, ?0603,?47nh mcft000091 inductor, ?0603,?56nh mcft000092 inductor, ?0603,?68nh mcft000093 inductor, ?0603,?82nh mcft000094 inductor, ?0603,?100nh mcft000095 inductor, ?0603,?120nh mcft000096 inductor, ?0603,?150nh mcft000097 inductor, ?0603,?180nh mcft000098 inductor, ?0603,?220nh mcft000099 inductor, ?0603,?270nh mcft000100 inductor, ?0603,?330nh mcft000101 inductor, ?0603,?390nh mcft000102 inductor, ?0603,?470nh mcft000103 inductor, ?0805,?10nh mcft000104 inductor, ?0805,?12nh mcft000105 inductor, ?0805,?15nh mcft000106 inductor, ?0805,?18nh mcft000107 inductor, ?0805,?22nh mcft000108 inductor, ?0805,?27nh mcft000109 inductor, ?0805,?33nh mcft000110 inductor, ?0805,?39nh mcft000111 inductor, ?0805,?47nh mcft000112 inductor, ?0805,?56nh mcft000113 inductor, ?0805,?68nh mcft000114 inductor, ?0805,?82nh mcft000115 inductor, ?0805,?100nh mcft000116 inductor, ?0805,?120nh mcft000117 inductor, ?0805,?150nh mcft000118 inductor, ?0805,?180nh mcft000119 inductor, ?0805,?220nh mcft000120 inductor, ?0805,?270nh mcft000121 inductor, ?0805,?330nh mcft000122 inductor, ?0805,?390nh mcft000123 inductor, ?0805,?470nh mcft000124 inductor, ?0805,?560nh mcft000125 inductor, ?0805,?680nh mcft000126 inductor, ?0805,?820nh mcft000127 inductor, ?0805,?1000nh mcft000128 inductor, ?0805,?1500nh mcft000129 inductor, ?0805,?2200nh mcft000130 inductor, ?0805,?3300nh mcft000131 inductor, ?0805,?4700nh mcft000132 inductor, ?0805,?10nh mcft000133 inductor, ?0805,?15nh mcft000134 inductor, ?0805,?22nh mcft000135 inductor, ?0805,?33nh mcft000136 inductor, ?0805,?47nh mcft000137 inductor, ?0805,?68nh mcft000138 inductor, ?0805,?100nh mcft000139 inductor, ?1206,?10nh mcft000140 inductor, ?1206,?15nh mcft000141 inductor, ?1206,?22nh mcft000142 inductor, ?1206,?33nh mcft000143 inductor, ?1206,?47nh mcft000144 inductor, ?1206,?68nh mcft000145 inductor, ?1206,?150nh mcft000146 inductor, ?1206,?220nh mcft000147 inductor, ?1206,?330nh mcft000148 inductor, ?1206,?470nh mcft000149 inductor, ?1206,?680nh mcft000150 inductor, ?1206,?1000nh mcft000151 important notice : this data sheet and its contents (the information) belong to the members of the premier farnell group of companies (the group) or are licensed to it. no licence is granted for the use of it other than for information purposes in connection with the products to which it relates. no licence of any intellectual property rights is granted. the information is subject to change without?notice?and? replaces?all?data?sheets?previously? supplied.? the?information?supplied? is?believed? to?be?accurate?but?the?group?assumes?no?responsibility? for?its?accuracy?or?completeness,? any? error in or omission from it or for any use made of it. users of this data sheet should check for themselves the information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. liability for loss or damage resulting from any reliance on the information or use of it (including liability resulting from negligence or where the group was aware of the possibility of such loss or damage arising) is excluded. this will not operate to limit or restrict the groups liability for death or personal injury resulting from its negligence. multicomp is the registered trademark of the group. ? premier farnell plc 2012. www.element14.com www.farnell.com www.newark.com v1.0 18/07/12 wire wound chip inductor free datasheet http:///
|
